1) Getting Started
Open the case and slide the cover off. The risers and power supply are included. The case does not come with a manual so you will have to download one off of the Antec website.
Open the case and slide the cover off. The risers and power supply are included. The case does not come with a manual so you will have to download one off of the Antec website.
2) Remove the Rack
This is where you will screw in your optical and hard disks. Put them aside in a safe place so you won't lose them.
This is where you will screw in your optical and hard disks. Put them aside in a safe place so you won't lose them.
3) Insert the Motherboard
The CPU is already on the motherboard so unlike other build projects you will not need to install the CPU spread thermal paste and mount a cooling fan.
The CPU is already on the motherboard so unlike other build projects you will not need to install the CPU spread thermal paste and mount a cooling fan.
| 4) | Wire the Motherboard It will be tight but wire up all of your motherboard connections now, because it will be harder when the rack is installed. |
0 comments:
Post a Comment